ATTENTION: THIS BOOKLET DOESN'T SUBSTITUTE THE OPERATION AND
MAINTENANCE MANUAL. IT’S NECESSARY TO READ CAREFULLY AND UNDERSTAND
THE OPERATION AND MAINTENANCE MANUAL BEFORE CARRYING OUT ANY
MANOEUVRE WITH THE MACHINE.
QUICK INSTRUCTIONS FOR HINOWA LIGHTLIFT 2614 PERFORMANCE
To start the machine battery cutter (under the bonnet) and
main key must be turned ON, if remote control display ask
to emergency STOP button must be pressed and released,
as reminded by the icon here on the right side. While all
the emergency stop buttons are released, thermic engine or
electric motor could be activated by pressing the relevant
buttons on the remote control (see picture
above).
Note1: On gasoline machine when the engine is
cold, once it’s ignited, it’s possible to warm it up
pressing the “WARM UP” button on the remote
control, engine will run faster for 20 seconds.
FIPE2614021701
Engine
preheat
button
Emergency STOP
button
Gravity
emergency
descent
Outriggers
automatic
retraction
Left track
1
st
cylinder
Jib
Turret
rotation
Right track
2
nd
cylinder
Basket
rotation
Extension
Basket
leveling
key
Electric
motor
(start-stop)
Thermic
engine
(start-stop)
Undercarriage
closing
Automatic
stabilization
Undercarriage
widening
Engine speed
selector
Stabilizers manual
operating
Service
menu
selector
Display
Permission of aerial
part operation from
ground
BATTERY CUTTER
MAIN KEY
PRESS AND
RELEASE
REMOTE
CONTROL
EMERGENCY
STOP
BUTTON
