CYCLOPS tornado osd series, Руководство пользователя

Страница: 7 / 18

PAGE 2
ROLL
GAIN Roll sensitivity Adjustment of the roll control sensitivity
ANG
Maximum turn
Angle
Default25°, Maximum 45°
PITCH
GAIN Pitch sensitivity Adjustment of the pitch control sensitivity
ANG
Maximum pitch
angle
Default10°, Maximum 20°
RESET AIRSPEED
Clear airspeed Re-clear the airspeed. We recommend reset airspeed before
takeoff if the environment changes.
CRUISE
AIRSPEED Set cruise
airspeed. Airspeed value (0-200Km/h) during auto pilot, when set as
OFF, the system will not control the airspeed.
SPEEDMAXLIM Maximal limit of
airspeed The air speed of the throttle in PA mode
SPEEDLOWLIM Lowest limit of
airspeed When the air speed of the model plane is lower than the set
value, the system will not climb to avoid stall.
PA HEADING
HOLD Heading mode
selection It’s optional to lock the course when in PA mode; you can
choose to disable it.
LOW POWER
RTH
Low-voltage
protection
automatically
return to home
In PA or AUTOPILOT when power voltage lower setting value,
automatically RTH until user switch back to manual flight
mode.
PAGE 3
PA SAFE RANGE
Flying range
exceed setting
value
In PA when flying range exceed setting value, automatically
RTH until user switch back zero, which disable function.
VIDEO FORMAT
Video format
selection
Video input format options between PAL, NTSC and AUTO,
when choosing AUTO option, the OSD will automatically
adjust the OSD display according to the input video format,
default PAL when no video input.
AHI AHI ON/OFF
User can choose show hide AHI (Artificial Horizon Indicator),
size adjusted through percent value fit different cameras
monitors.
SBUS
FUTABA S-BUS
input
Chose Y and quit the Menu page, connect FUTABA Receiver
SBUS1 (Do not use SBUS2!!!) to RUD in and restart OSD.
The Transmitter Chanel mapping as:
1CH-AIL; 2CH-ELE; 3CH-THO; 4CH-RUD; 5CH-MOD; 6CH-DIS
RETURN Return to menu When return to menu, the system will save all settings.