CYCLOPS tornado osd series, Руководство пользователя

Страница: 15 / 18

Notes of other special symbols
Power alarm symbol. When the power consumption of the dynamic system
reaches the set value BAT SCALE in the menu, this symbol will appear and flash to
alarm.
Semi manual stabilization mode symbol, when the flight mode switch
switches to the stabilization mode, this symbol will appear, at this time, the aileron
is in auto-balance operating mode, and the OSD automatic will automatically begin
the fixed altitude flight.
Height and heading locks of automatically fixed altitude flight symbol. When
switch Flight mode to PA, the system will record the switching time, altitude and
heading values and in the PA mode, it will automatically maintain the altitude and
heading in flight.
When the manipulator control the elevator or aileron joystick, the lock symbol
disappears, and can change the flight altitude or heading; when the joystick returns
to the neutral position, the lock symbol appears again and re-lock the current altitude
or heading value and begin the auto fixed altitude and heading in flight.
Automatic waypoint flight symbol.
Automatic return symbol.
Recording data to the TF card.
GPS disconnected or data errors.
Posture alarm symbol. The occurrence of this symbol indicates the system's
measurement of posture value is not accurate, and can only manipulate the aircraft
manually, switching flight mode to PA AUTOPILOT and RTH is forbidden by the
system.
Possibilities of the occurrence of posture alarm symbol:
1
、
Excessive aircraft vibration
2
、
The first 10 seconds after starting the OSD
3
、
The aircraft's lateral posture tilt exceeds 70 degrees
4
、
After the aircraft's violent flight actions (such as spiral, long-time inverted flight
etc.)