From the PC not currently part of your XP4000 Series system
(This may be the PC where the XP Administrator is installed.)
1. Open the OSD Configuration Utility software by clicking on the OSD.exe icon.
2. Select the Transfer Menu.
3. Choose the option, ‘Set Transfer Port’.
4. Enter the com port setting that corresponds with the port you are using for
communication between the XPDU and the PC. Leave the remaining options at
their default values.
5. Click on ‘Test’.
6. Choose ‘OK’ to end the test, then click ‘OK’ again to exit Terminal Options.
7. Reopen the Transfer Menu and select the ‘Read’ option.
8. Click the ‘Start’ button to begin reading information from the XPDU. When the
process is finished, select close.
10
