background image

 3

Cybex 18030 Bravo Lift Owner’s Manual

Safety

Safety Guidelines And Practices

Cybex International partners with equipment owners to establish the safest and most effective setup 

of Cybex equipment. Cybex International urges each facility owner to carefully follow all safety 

precautions. Following theses precautions are the best protection against personal injury or damage 

to equipment or facility.
The most important safety precaution is to maximize stability for every piece of equipment. The 

equipment should be securely anchored to the floor. It is imperative the floor be level.
Cybex recommends that all fitness equipment be used in a supervised area. It is recommended that 

the equipment be located in an access controlled area. Control is the responsibility of the owner. The 

extent of control is at the discretion of the owner. 

 

It is the responsibility of the purchaser/owners of Cybex products to read and understand the owner’s 

manual, and warning labels; as well as instruct all individuals, whether end users or supervising 

personnel, on proper usage of the equipment.

Read the Owner’s Manual carefully before assembling, servicing, or using the equipment. In an 

institutional environment, it is the facility owner’s responsibility to properly instruct users on the proper 

operation of the equipment and to warn them of the potential hazards. 

Follow and enforce the User Safety Precautions to protect both the user and the equipment. 

Keep children away from selectorized strength equipment. Teenagers or disabled users must be 

supervised. 
Do not allow anyone, including trainers, to use equipment in a manner other than shown on the 

instructional placards located on every machine.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper 

operation of the equipment and review all labels.

WARNING:  Serious injury or death could occur if these safety precautions are not 

followed:

User Safety Precautions

• 

 

 Read all warnings posted on the machine. Warnings are posted on each machine to alert the 

user to potential problems. 

Following warning labels will prevent injury or equipment damage.

• 

 Read and understand warning labels and instructional placards prior to exercising. Obtain 

instruction prior to use. 

Each machine has instructions posted on the equipment for proper 

use.

Содержание Bravo Lift































Отзывы: