On-Screen Display Operations
17
3. When prompted for another cascade level, type
Y
and press
Enter
.
4. Enter the letter that corresponds to the computer port on the cascaded
AutoView you are adding and press
Enter
.
5. When you have finished adding levels (up to two total), type
N
when
prompted for another cascade level and press
Enter
.
Press
Esc
at any point to exit this operation without adding the channel.
Deleting an Existing Channel
1. Highlight the channel you wish to delete in the main OSD Window.
2. Press the
Control
key twice or type
Alt-M
to access the Command Menu.
3. Select ‘Channel maintenance’ from the Command Menu.
4. Choose the ‘Delete channel’ option.
5. Type
Y
or
N
at the prompt to confirm the deletion and press
Enter
.
Changing Channel Names and Addresses
1. Highlight the channel you wish to change in the main OSD Window.
2. Press the
Control
key twice or type
Alt-M
to access the Command Menu.
3. Select ‘Channel maintenance’ from the Command Menu.
4. Choose the appropriate option.
5. Enter the new channel name or address and press
Enter
to accept.
Press
Esc
at any point to exit this operation without saving the changes.
Содержание AUTOVIEW COMMANDER -
Страница 1: ...Installer User Guide ...
Страница 2: ...AutoView Commander Installer User Guide ...
Страница 10: ...AutoView Commander Installer User Guide ...
