Cybex Owner’s Manual
25
Install shield
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
2
3
1
Item Description
1
Base
2
Screws (7)
3
Shield
Install the front cover
Perform this step if you removed the front cover. If not, skip to next step.
Install, but do not fully tighten the four screws securing the front cover to the base using a Philips
screwdriver.
1
2
Item Description
1
Front cover
2
Screws (4)
Install motor cover
1.
Place motor cover on carpeting or other soft surface. Do not scratch top of hood cover.
2.
Insert the four plastic connectors into the motor cover.
1
2
Item Description
1
21 Plastic connectors (4)
2
Motor cover