CYBEX 770T-CT, Руководство пользователя

Страница: 34 / 72

Cybex 770T-CT Treadmill Owner’s Manual
34
The Setup options are:
Time and Date See Initial setup above
Units and Power See Initial setup above
Workout times Set Default and Max time
Limits Set minimum speed, maximum speed and maximum
incline
Language Select language to use for CardioTouch text
Exit
Set Up Mode
.
Exit Set Up Mode by tapping the Toolbox ico n , then tap the Home icon . The screen will
refresh.
Your treadmill is now ready for use. Proceed to Testing the Treadmill Operation. Follow the
instructions in the Operation chapter to learn how to operate the treadmill. You should begin with
walking speeds first, to be sure everything is functioning properly.
WARNING:
Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Be sure that all electrical requirements are
met as indicated in the specifications at the front of the manual and at the
beginning of this chapter prior to proceeding.
Testing Operation
Use the following instructions to test the full speed and incline range of the treadmill and to check the
belt for proper operation.
CAUTION: Serious injury or damage to machine can occur. To avoid injury or damage
the following procedure must be followed.During this procedure STAY OFF
THE RUNNING BELT! Stand with your feet on the two steps.
Plug the power cord into a power outlet from a grounded, dedicated circuit as described under 1.
Electrical Requirements in this chapter without anyone on the treadmill.
Ensure the power cord is not being pinched under the front of the treadmill.
Toggle the on/off (I/O) power switch under the front end of the treadmill to the on position (I). 2.
The control panel will light up and be in the opening screen.
Press the 3. Quick Start key. The treadmill begins a countdown “3...2...1” and sounds a tone
for each count. After it reaches one (1), the treadmill gives a longer tone and then begins
accelerating the belt to reach 0.5 mph (0.8 kph). The lower left display will show the incline and
the lower right display will show the actual speed.
Press and hold down the 4. Speed + key until the treadmill reaches a speed of approximately 4
mph (6.4 kph), as indicated on the display.