CyberView X5-MS, Руководство пользователя

Страница: 14 / 128

ENGLISH
15
ENGLISH
14
d. Single Slide Scanning
•
Load the empty magazine into the tunnel FIRST until it touches the slide
transport arm completely. Slide the magazine forward to be sure that the
transport arm is in the fi rst slot of the magazine.
•
Press the eject button [I] to make the slide holder open exposing the loaded
slide.
•
Place the slide as illustrated [I] into the slide holder and press the slide holder
down [II].
•
Open the CyberView X 5.0 driver program to scan the slide.
Attention!
When using the single slide scanning function, please check the slide transport arm
has been moved completely into the unit and the cover for magazine tunnel is taken off .
Eject
Button
Slide
Holder
II.
c. Slide Viewer
The scanner has a built in mini light panel which allows the slides to be man-
ually previewed with a backlight before inserting into the tray for scanning.
Insert the slide into the slide viewer for previewing. The scanner has to be
switched on. Gently press down on the top of the slide to engage the back
light for viewing the slide.
Mini Light Panel
Additional features
Manual Control Panel
a. You can advance or reverse the slide by pressing the navigation button
or and scan manually with the scan button to enable one button scan
function.
Please Note:
When installing your new scanner onto a Windows system that already has an-
other USB Flatbed scanner or All-in-one Scan/Copier/Printer device installed, it may be necessary
for you to disconnect the other scanner from the USB port for the Film scanner to work properly,
Manual Control Panel
One Button Scan
1. Open the CyberView (Ref. page 16 to acquire the CyberView driver program)
2. Confi gure Scan Settings (see Page 17)
3. Select the Scan to directory, fi le format (TIF or JPG, once confi gured, Press the
scanner button ( ) to begin scanning.
NOTE:
If you do not open CyberView FIRST, the scan button will not function.
I.
14