Broadband Security Router User Guide
- 26 -
URL Access Limit:
Check
“Enable”
or
“Disable”
to make this function active
or inactive.
Website Access:
Check
“Allow”
to allow users on the network to access
specific website listed on the location only. In contrast, to
restrict users on the network to access the website listed on
the location, check
“Block”
in this item.
Block Access Website:
Enter the website addresses to be accessed/blocked on the
locations. Up to twenty website addresses can be entered into
the locations.
Show URL Log:
URL Log allows network administrators to check the URL
access records. Click the button of “
Show URL Log”
to go
to the URL Filter Log table. This table lists the
users/computers by their IP Addresses, the access status, and
their URL Access destinations.
Private MAC Filter
This function allows network administrators to use the MAC addresses of PCs to
restrict users/computers from accessing the Internet.
Filtered MAC Address:
There are fifty sets divided into five groups in this function.
You can choose each group by selecting from the pop-down
list. Enter the MAC addresses of the computers you wish to
block in the columns, and then those users/computers cannot
access Internet at all.