Broadband Security Router User Guide
- 16 -
The
“Username and Password Required”
prompt box will appear. Leave the
Username field empty and type
“admin”
(default password) in the Password field.
Click “
OK
”. The setup screen will then appear.
Basic Configuration – Setup
The
“OnePage Setup”
screen is the first screen you will see when you access the
Utility
. If the router has already been successfully installed and set up, this screen’s
values will already be properly configured.
Host Name:
This entry is required by certain ISPs.
Domain Name:
This entry is required by certain ISPs.
Time Zone:
Select the time zone of your location from the drop down list.
Private IP Address:
The “Device IP Address” and “Subnet Mask” of the router are
used for the internal LAN. The default values are 192.168.1.1
for the IP Address and 255.255.255.0 for the Subnet Mask.
Wireless
Check
“Enable”
or
“Disable”
to make the wireless LAN function active or inactive.
SSID:
As
the acronym for
Extend Service Set Identifier
,
ESSID is the unique name shared among all clients and
Wireless Broadband Router in a same wireless network.
The ESSID must be identical for all points and must not
