manualshive.com logo in svg

CyberTAN WR214C, Руководство пользователя, Страница: 22 / 67

Поделиться
Скачать
CyberTAN WR214C Скачать руководство пользователя страница 22

Broadband Security Router User Guide

 

 

- 18 - 

administrator. 

Default TX Key 

Select one of the four keys to be the 

encryption key you are going to use in the wireless 
network. To be sure that all the points in a same wireless 
network have to have the same encryption key.

 

 

WAN Connection Type 

There are four options for WAN connection types, Obtain IP automatically, Static IP, 
PPPoE, and PPTP.   

The connection type you need to choose is dependent upon the settings assigned by 
your ISP. 

Which connection type you need to choose may differ from ISPs as well as 

the service you applied for. It depends on your ISP’s assignment. If you are unsure 
which connection type you currently use, contact your ISP to obtain the correct 
information. 

Obtain IP automatically   

It is the 

default 

option for the router. If your ISP automatically assigns an IP address 

and other values to the High-Performance Wireless Router, leave them there without 
making any changes. 

Static IP 

The WAN IP Address and Subnet Mask of the router entered here are used by external 
users of the Internet (including your ISP). If your ISP assigned a fixed IP address, select 
this item and enter the IP Address and Subnet Mask provided by your ISP. 

 

Specify WAN IP Address: 

Enter the IP address provided by your ISP.

 

Subnet Mask: 

Enter the subnet mask values provided by your ISP. 

Default Gateway IP 

Your ISP will provide you with the Default Gateway IP 

Содержание WR214C




































































Отзывы:

Нет отзывов