CyberPower STP3T10KE, Руководство пользователя

Страница: 7 / 43

Smart Tower UPS 10-30KVA User Manual
Chapter 1 Quick Start
1
Chapter 1 Quick Start
1.1 Introduction
This chapter describes the basic principles of UPS installation and commission; it helps users to
achieve a rapid installation and commissioning
1.2 Unpacking &Inspection
Check the following items after receiving the products.
1. Check that the package is intact. If there is any damage or humidification, please contact the local
agents or offices.
2. Check the outer type designation label in consistence with the booked product. If not, please contact
the local agents or offices.
3. Check if there is no water inside the package and any damage or crack to the shell. If not, please
contact the local agents or offices.
4. Check that the nameplate is the same as the outer type designation label. If not, please contact the
local agents or offices.
5. Check whether the internal accessories are complete. If not, please contact the local agents or
offices.
1.3 Environment Inspection
Confirm the items as following before UPS installation.
1. Check the environment temperature, if above 25 ,please add cool system.
℃
Note: Environment temperature above 20 , b
℃
attery life reduces half every each 10 up.
℃
2. If the operation environment temperature is below 0 or not, add heat equipment if yes..
℃
3. If the UPS operation environment humidity is above 90% or condensation, please add additional
protection.
4. Whether there is sunshine or external species invasion in the UPS operation environment, please
add additional protection.
5. If there is dust, inflammable and explosive gas in UPS operation environment, please add additional
protection.
1.4 Installation Inspection
After installation, check the items as below:
1. If the UPS is installed on inflame retarding material?
2. All the cables connected correctly
3. All the grounded system connected correctly.
4. If the operation space around UPS enough.
5. Confirm all the UPS external terminals are tight, and the torque should meet the requirements.
6. Confirm that there are no screws, cables and other electric conductor left inside the UPS. If there is,
please take out.