CyberPower STP3T10KE, Руководство пользователя

Страница: 10 / 43

Chapter 2 Installation Guidance
Smart Tower UPS 10-30KVA User Manual 4
After the carton opening, verify the product label and confirm the correctness of the equipment. The
equipment label is attached on the back and front door which show the UPS model, capacity and main
parameters.
Warm Tips: Please dispose the wasted material in accordance to
environmental protection requirements after disassembly.
To prolong the service life, the UPS location shall be selected to ensure:
convenient wiring
Sufficient space for operation
good ventilation , enough for UPS heat dissipation
No ambient corrosive gases
Not damp and no heat sources
Not dusty
Meet the fire protection requirements
The operating environment temperature is 20
℃
-25
℃
,the batteries maximum efficiency temperature
range (for the information about the battery storage and transportation as well as the environment,
please refer to table 7-2)
2.3.2 UPS Composition
UPS compositions refer to fig 2-2.
a. 10KVA~30KVA cabinet without built-in battery b.10KVA~30KVAcabinet with built-in battery
Fig 2-2 UPS Component Diagram
2.3.3 Operation Space
As UPS has no ventilation grills at either side, no clearance is required for the sides.
For the convenience of daily operation tightening the power supply terminals in the UPS cabinet, with
the exception meet the local requirements, enough space also should be retained for the cabinet front
and back doors. When the front doors are fully opened, a person can pass through freely. Keep the UPS
cabinet back door distance away from the wall or other cabinet for maintenance more than 800mm.
2.3.4 Front Operation and Rear Operation
The UPS device layout makes the maintenance, diagnosis and repair of the cabinet completely at the
front and rear, thus reducing the side space requirements
2.3.5 Final Position
After UPS has been finally located, ensure the expansion bolts fixing the UPS reliably.