This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual
thoroughly before attempting to unpack, install, or operate the UPS.
CAUTION!
The UPS must be connected to a grounded AC power
outlet with fuse or circuit breaker protection. DO NOT plug the UPS into
an outlet that is not grounded. If you need to power-drain this
equipment, turn off and unplug the unit.
CAUTION!
The battery can power hazardous components inside the
unit, even when the AC input power is disconnected.
CAUTION!
The UPS should be near the connected equipment and
easily accessible.
CAUTION!
To prevent the risk of fire or electric shock, install in a
temperature and humidity controlled indoor area, free of conductive
contaminants. (Please see specifications for acceptable temperature and
humidity range).
CAUTION!
To reduce the risk of an electric shock, do not remove the
cover, except to service the battery. There are no user serviceable parts
inside, except for the battery.
CAUTION!
To avoid electrical shock, turn off the unit and unplug it from
the AC power source before servicing the battery or installing a computer
component.
CAUTION!
To reduce the risk of fire, connect the UPS to a circuit with
30 amperes maximum over-current protection in accordance to CE
requirement.
CAUTION!
The AC outlet where the UPS is connected should be close to
the unit and easily accessible.
CAUTION!
Please use only VDE-tested, CE-marked mains cable, (e.g.
the mains cable of your equipment), to connect the UPS to the AC outlet.
CAUTION!
Please use only VDE-tested, CE-marked power cables to
connect any equipment to the UPS.
CAUTION!
When installing the equipment, ensure that the sum of the
leakage current of the UPS and the connected equipment does not
exceed 3.5mA.
CAUTION!
This is permanently connected equipment and only qualified
maintenance personnel may carry out installations.
CAUTION!
Do not unplug the unit from AC Power during operation, as
this will invalidate the protective ground insulation.
CAUTION!
To avoid electrical shock, turn off and unplug the unit first,
then install the input/output power cord with grounded. Connect the
ground wire prior to connecting the line wires!
CAUTION!
Do not use improper size power cord to avoid damaging your
equipment and avoid fire hazards.
CAUTION!
Wiring must be done by qualified personnel.
CAUTION!
DO NOT USE FOR MEDICAL OR LIFE SUPPORT
EQUIPMENT! Under no circumstances this unit should be used for
medical applications involving life support equipment and/or patient care.
CAUTION!
DO NOT USE WITH OR NEAR AQUARIUMS! To reduce
the risk of fire, do not use with or near aquariums. Condensation from
the aquarium can come in contact with metal electrical contacts and
cause the machine to short out.
DO NOT INSTALL THE UPS WHERE IT WOULD BE EXPOSED TO
DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!
DO NOT BLOCK OFF VENTILATION OPENINGS AROUND THE
HOUSING!
DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR
DRYERS TO UPS OUTPUT SOCKETS
UNPACKING
UPS unit
Rack mount ears (Stands) (2)
IMPORTANT SAFETY INSTRUCTIONS
Rack mount ear & rails screws (34)
User’s manual
Screw hole dust covers (8)
Rack mount rails (1 set – left and
right sides)
Front panel
Input/ Output terminal cover
1
