6
BATTERY REPLACEMENT (continued)
BATTERY REPLACMENT PROCEDURE:
REMINDER!
The used batteries are hazardous wastes and must be disposed through recycling. Most retailers
that sell lead-acid batteries collect used batteries for recycling, as required by the local regulations.
Remove the front panel
on the right side.
Remove the two retaining
screws of the cable
protection cover, and then
remove the cover itself.
Disconnect the black and
red wires from the battery.
Remove the retaining screw.
.
Put the new battery packs back into
the compartment. Tighten up the
screws and replace the cable
protection cover and the front panel.
Recharge the unit for at least 8 hours
to ensure that the UPS performs to the
expected runtimes.
