background image

FCC Notice 

 

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.  These 
limits are designed to provide reasonable protection against harmful interference in residential installation.  This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:  (1) Reorient or relocate the receiving antenna.  (2) Increase the 
separation between the equipment and receiver.  (3) Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.   (4) Consult the dealer or an experienced radio/TV technician for help.   Any special accessories needed for compliance must 
be specified in the instruction.   
 
CAUTION:  A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio 
and television reception.  It is essential that only the supplied power cord be used.  Use only shielded cables to connect  I/O devices to this 
equipment.  
 
CAUTION:  Any changes or modifications not expressly approved by the guarantee of this device could void the user’s authority to operate the 
equipment. 

 
 
 
 

 

 

 

 
 
 
 
 
 

For more information, contact us at: 

 

CyberPower Systems (USA), Inc. 

5555 12

th

 Avenue East, Suite 110 

Shakopee, MN  55379 

 

Toll-Free:  (877)-297-6937 

Tel:  (952)-403-9500 

Fax:  (952)-403-0009 

 

Email:  [email protected] 

Web:  www.cyberpowersystems.com 

 
 
 

Entire contents copyright ©2002 CyberPower Systems, Inc. 

All rights reserved.  Reproduction in whole or in part without permission is prohibited. 

PowerPanel Plus™ is a trademark of CyberPower Systems (USA), Inc.

 

Содержание CPS825AVR


















Отзывы: