APPROXIMATE RUNTIME IN MINUTES
DEFINITIONS FOR ILLUMINATED LED INDICATORS
Power
On
Wiring
Fault
Circuit
Breaker
Alarm
Condition
On Off Set Off
Normal
Off On/Off Set
Two
Beeps
Utility Failure- The UPS is providing battery power to
the Battery-Power Supplied outlets.
Off On/Off Set
Rapid
Beeps
Utility Failure- The UPS is providing battery power.
The rapid beeps indicate the battery will run out of
charge within a few minutes.
Off Off Up
Two
beeps or
rapid
beeps
Overload- Occurs in the Full-time Surge Protection
Outlets. Turn the UPS off and unplug at least one
piece of equipment from the UPS. Wait 5 seconds,
reset the circuit breaker and turn the UPS on.
On/Off On/Off Set
Long
Beep
Overload- Occurs in the Battery-power Supplied
Outlets. Turn the UPS off and unplug at least one
piece of equipment from the UPS. Wait 5 seconds,
reset the circuit breaker and turn the UPS on.
Off Off Up
Long
Beep
Overload- Occurs in the Battery-power Supplied
Outlets. Turn the UPS off and unplug at least one
piece of equipment from the UPS. Wait 5 seconds,
reset the circuit breaker and turn the UPS on.
On/Off On Set/Up
None
Electrical Wiring Fault- This indicates a wiring a
problem such as a bad ground, missed ground or
reversed wiring within the AC outlet. User is advised
to disconnect all electrical equipment from the outlet
and have the outlet checked by an electrician.
Load
(Watts)
CPS825AVR Model
Runtime
75 50
125 35
150 25
200 15
250 10
300 5
350 4
410 3
Sample Systems
Desktop PC with 15” Monitor
45-60
Desktop PC with 17” Monitor
30-45
Desktop PC with 21” Monitor
25-30
