CPS1500PIE
Copyright © 2014 CyberPower Systems, Inc.
5
5. AC Output Circuit Breaker
Located on the side of the EPS, the circuit breaker serves to provide overload and fault protection.
*
Note:
Circuit breaker 5a provides 1a socket max 16A protection for CPS1500 Series.
*
Note:
Circuit breaker 5b provides max 12A protection for UK socket or 16A for Schuko and France socket.
6. AC Input Circuit Breaker
Located on the side of the EPS, the circuit breaker serves to provide overload and fault protection.
7. Battery Input Wiring Fault LED
Battery input wiring fault LED will illuminate and make an audible alarm to indicate the wiring polarity is
reversed only when the DC circuit breaker is off.
*Note:
Please make sure the DC circuit breaker is off before connecting the battery to the machine.
8. Output Selector
The unit has specific Bypass function.
Bypass:
The switch provides the bypass for charge only and shutdown the unit when the utility power exceeds 300Vac or
below 140Vac. In charger only mode, AVR and battery backup will not work. However
,
no matter under what situations, the
charger would keep charging external batteries if utility power is still alive.
9. Power Switch
Used as the master on/off switch for equipment connected to the battery power supplied outlets.
10. Power ON Indicator
This LED is above the power switch. It illuminates when the utility condition is normal and the EPS outlets
are providing power, free of surges and spikes.
11. Multifunction LCD Readout
High resolution and intelligent LCD display shows all the EPS information with icons and messages. For
more information please check the DEFINITIONS FOR ILLUMINATED LCD INDICATORS section.
12. LCD Display Toggle / Selected Switch
Users can
monitor EPS status and set up functions by using the toggle.
