CPS1500PIE
Copyright © 2014 CyberPower Systems, Inc.
9
EPS Status Inquiry and Functions Setup
p
1. General Mode
a. Press the
LCD Display Toggle
(Selected Switch) to check the status of the EPS.
Item
Unit
Input Voltage
V
Output Voltage
V
Load Capacity
%
Battery Capacity
%
b. Press and hold the Display Toggle for 4 seconds.
– If the machine is in the Battery Mode, it enters/leaves Silent Mode.
– If the machine is in the Line Mode, it proceeds to Self Test.
c. If the Display Toggle remains untouched for over 30 seconds, the LCD backlight will turn off
automatically.
2. Set-up Mode
Step 1:
The machine enters Set-up Mode after the Display Toggle is pressed and held for 10 seconds.
When icons 1, 2 (see page 8) all illuminate, the EPS is in the Set-up mode.
Step 2:
By pressing the Display Toggle, users can switch setup functions:
Items
Unit
Delay Time
Min
Battery Capacity
None
Charging Current
A
Nominal Output Voltage
V
Static Frequency Tolerance
%
Slew Rate
%
Battery Shutdown Voltage
V
Mode Select
None
Firmware Version
None
Error Code
None
a.
Delay Time: The time delays for switching from Battery Mode to Line Mode. The machine will
switch from Battery Mode to Line Mode within the preset delay time after the AC power
transmission reaches stability.
Default 0.0 minutes
Choice 0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 minutes
