8
DISC TRAY
DISPLAY PANEL
PLAY/PAUSE
ON / STANDBY
DV IN
LEFT/RIGHT AUDIO IN 2
COMPOSITE VIDEO IN 2
- Loads DVD+R/RW, DVD, CD-ROM,
VCD/SVCD, MP3, JPG and other optical discs.
- The front display panel shows
information about the unit's operation, such as
current chapter and elapsed time during playback.
- Begins playback of a disc, chapter
or track. Press again during playback to pause,
and again to resume playback.
- Turns the unit on and sends the
unit to standby mode. In standby mode, the unit
will use a minute amount of power to enable
power-on by the remote control.
- Front DV Input for recording. To select,
use the SOURCE key and select DV IN
- Front Stereo Audio
Inputs for recording. These inputs are shared with
the VIDEO IN 2 input.
- Front Composite
Video Input for recording. To select, use the
SOURCE key and select VIDEO IN 2.
OPEN/CLOSE
RECORD
- Press to open or close the disc
tray.
- Begins a Live Recording.
7
8
3
4
5
1
2
6
9
Front Panel
Functions
5
6
8
9
1
2
3
4
7
VIDEO IN 2
L
R
AUDIO IN
DV IN
STANDBY/ON
RECORD
/
DVR 1600
DVD RECORDER WITH PROGRESSIVE SCAN PLAYBACK
7
8
10
3
4
5
1
2
6
9
Back Panel
~100-230V
AC IN
1
2
3
9
6
4
7
8
11
5
10
Pr Cr
AUDIO
VIDEO OUTPUT
INPUT 1
OUT
IN
AUDIO
AUDIO OUTPUT
POWER CORD SOCKET
ANTENNA IN / OUT
VIDEO INPUT 1
S-VIDEO INPUT
STEREO AUDIO INPUTS
COMPOSITE VIDEO OUTPUT
S-VIDEO OUTPUT
COMPONENT / PROGRESSIVE SCAN VIDEO
OUTPUT
STEREO AUDIO OUTPUT
COAXIAL DIGITAL AUDIO OUTPUT
- Plug the matching end
of the power cord into the unit before connecting
the other end to the wall socket.
- For Antenna or Cable TV
connection. This is
connection to TV,
this means it does NOT transfer the output signal
from the DVD Recorder to your TV (i.e., CH 3).
- Composite Video input for
recording. To select this input, use the SOURCE
button and choose VIDEO1.
- S-VIDEO input for recording. To
select this input, press SOURCE and choose S-
VIDEO.
- Use with S-VIDEO
INPUT or VIDEO INPUT 1 for recording.
- Standard video
output supported by most TVs.
- Connect to TVs with S-
VIDEO in for better picture quality than standard
composite video.
(Y Pb/Cr Pr/Cr)- Use this output with
TVs supporting Component Video or Progressive
Scan input for best video quality. Select the
PROGRESSIVE SCAN MODE in the Recorder's
SETUP MENU for P-SCAN TVs.
- Connect to TVs or
other audio equipment supporting Stereo Audio in.
- Use a
special Coaxial Digital Cable to send the raw
coded digital signal to devices supporting digital
audio decoding.
Passthrough
EN
