CyberGuard SnapGear, Руководство пользователя

Страница: 34 / 185

Network Connections
30
3. Network Connections
This chapter describes the Network Setup section of the SnapGear Management
Console. Here you can configure each of your SnapGear appliance’s network ports
(Ethernet, serial). Network ports may be configured for Internet connection, LAN
connection, DMZ connection, remote dialin access or Internet failover.
If you are using a SnapGear gateway appliance, the section Set up the PCs on your LAN
to access the Internet in the chapter entitled Getting Started describes how to configure
the PCs on your LAN to share the connection once your Internet connection has been
established.
Connections
Under the Connections tab, each of the network ports of your SnapGear appliance is
displayed alongside its Device Name and current Configuration . Initially, all network
ports will be unconfigured, aside from LAN .
A network port can be configured for a different function by selecting a new configuration
from the
Configuration pull down menu. The current configuration can be viewed or
modified by selecting Edit current settings . Selecting Remove this configuration
unconfigures a network port (you will be prompted to confirm this action).
Figure 3-1
Each of the network ports that may be present on your SnapGear appliance and how
they may be configured are discussed below.