Cyber Suite CYB-KLED, Руководство по установке, Страница: 7 / 32

4 CYB-KLED CyberSuite Installation Manual
Zone Input Wiring
The CyberSuite LED Keypad is capable of connecting to 4 zone
inputs, each zone input can then be programmed to perform the
required function in the system.
The following diagrams show each of the zone wiring configuration
settings that are possible. The programmed zone configuration for
the CyberSuite LED Keypad is made in the option settings. Refer to
the General Options Section on Page 17 for the programming of the
zone configuration.
When using a tamper input on a device the tamper contacts
must be normally closed and wired in series.
All resistors required to wire the zone configurations are
provided with the CyberSuite LED Keypad in the accessory
bag.
Figure 4 - 2 Zone Input (No Resistors)
Figure 5 - 2 Zone Input (1K and 1K)