Cyber Suite CYB-KLED, Руководство по установке, Страница: 16 / 32

13 CYB-KLED CyberSuite Installation Manual
LOCAL INSTALLER LOGIN
Introduction
The default local installer code is [0000]. To access the local
installation menu, press:
[ENTER] , [0000]
The
INSTALL
LED will then be lit to notify that Installer mode has
been entered.
One
Zone LED
will be lit to show you which selection from the
current menu you are currently at. You can change your selection
with the [
Ï
] and [
Ð
] keys and then press [ENTER] to access that
menu item, or just press the number key corresponding to the
menu item you wish to select.
The following pages will outline the menu selections available, along
with their shortcut keys.
Notes on Installer Access
If a module update has been performed on the system controller and
the user code at system controller user location 3 (UN00003) has
been changed. The code that is entered in this setting is now the
local installer code. This code is programmed system wide when an
update is performed.
To disable the Installer Code on ALL CyberSuite keypads
(Recommended) delete the code for User UN00003 by following the
instructions in the CyberSuite System Reference Manual for deleting
a user pin code.
You can not access the installer menu if the CyberSuite system is
armed. Disarm the CyberSuite system before attempting to login
with the installer code.
It is recommended that all installer modifications are completed and
downloaded using the Protege System Management Suite (PRT-
SMGT). Ensure a module update command is executed when
modifications are being made.