Cyan L-AMP Скачать руководство пользователя страница 116

Страница: 116 / 216

Cyan Z-Series Engineering and Planning Guide

Release 5.0

P a g e

116

700-0023-05-00 Rev. 1

2.15 FLX-216i Multi-Rate OTN Muxponder Module

The Cyan Z-Series FLX-216i is a multi-rate OTN muxponder I-Temp module. The FLX-216i module is a

highly scalable OTN switching and muxponder optimized for deployments in network transport

applications. The environmentally hardened FLX-216i module provides two XFP-based OTU2 ports and

sixteen SFP-based client ports. The SFP ports support the following service interfaces:

•

Optical GbE

•

OC-3/12/48

•

STM-1/4/16

The FLX-216i module provides OTN-level multiplexing of GbE, OC-3/STM-1, OC-12/STM-4, and

OC-48/STM-16 signals into two OTU2 signals. OC-48/STM-16 is mapped to ODU1 (2.5G). OC-3/STM-1,

OC-12/STM-4, and GbE are mapped to ODU0 (1.25G). The minimum cross-connect level is ODU0. There

is a maximum of eight ODU0 per 10G trunk interface. A maximum of eight OC-48/STM-16 interfaces can

be mapped to 2 x OTU2 (20G).
The FLX-216i module also provides non-blocking OTN cross-connect function across all the ports on a

module. The cross-connect function is performed at the ODU0 and ODU1 levels. Trunk port to trunk port

cross-connections are also supported.
The FLX-216i OTN muxponder module provides the following features and benefits:

•

Aggregation and transport of Ethernet and SONET/SDH over the same wavelength.

•

Pluggable optics provides for DWDM applications and flexibility in optical module reach.

•

High-capacity 60 Gbps non-blocking OTN (ODU0/ODU1) cross-connect fabric capacity ensures

scalable performance.

•

High-density design is optimized for edge applications.

•

Environmentally hardened for deployment in remote cabinets.

Note: Facility protection and equipment protection configured with a protected card pair

interconnected across the backplane is not supported.

The graphic below shows the FLX-216i trunk and client interfaces functional block diagram and the OTN

muxponder function.

Figure 59: FLX-216i Trunk and Client Interfaces

Содержание L-AMP



















































































































































































































Результаты поиска

Содержание L-AMP

Отзывы:

Бренды по названию

Популярные бренды

Cyan L-AMP, Инженерное и планировочное руководство

Результаты поиска

Содержание L-AMP

Отзывы:

Бренды по названию

Популярные бренды