Cyan L-AMP Скачать руководство пользователя страница 102

Страница: 102 / 216

Cyan Z-Series Engineering and Planning Guide

Release 5.0

P a g e

102

700-0023-05-00 Rev. 1

2.12 SFT-10G16 Multi-Rate Transponder Module

The SFT-10G16 is a high-density, multi-rate transponder module for the Cyan Z-Series packet-optical

transport platforms (P-OTPs) that addresses a broad range of service requirements. The SFT-10G16

performs 3R signal regeneration (re-time, re-shape, re-transmit) and wavelength conversion in CWDM and

DWDM applications.
The multi-protocol architecture of the SFT-10G16 extends the reach of client signals such as Fibre Channel,

Ethernet, SONET/SDH and Optical Transport Network (OTN) at data rates ranging from 1.0 to 11.3 Gbps.

The SFT-10G16 provides 16 SFP/SFP+ client or line-side ports.

Figure 50: Z-Series SFT-10G16 Module

The SFT-10G16 module provides the following features and benefits:

•

Compatible with the Cyan Z22 (-48V shelf), Z33, and Z77 shelves.

•

Works in conjunction with Z-Series LAD modules.

•

Client interfaces supported:



GbE (1 Gbps)



10 GbE LAN PHY (10.3 Gbps)



10 GbE WAN PHY (9.9 Gbps)



SONET OC-48, SDH STM-16 (2.5 Gbps)



SONET OC-192, SDH STM-64 (9.9 Gbps)



Fibre Channel 1G/FICON (1.1 Gbps)



Fibre Channel 2G/FICON 2G (2.1 Gbps)



Fibre Channel 4G (4.3 Gbps)



Fibre Channel 8G (8.5 Gbps)



Fibre Channel 10G Serial (10.5 Gbps)



OTU1 (2.7 Gbps)



OTU1e (11 Gbps)



OTU1f (11.3 Gbps)



OTU2 (10.7 Gbps)



OTU2e (11.1 Gbps)



OTU2f (11.3 Gbps)

•

All client interfaces are carried transparently and the regeneration is protocol agnostic.

•

High-density design supports up to 16 client or line-side ports.

•

Pluggable SFP/SFP+ optics support 850nm, 1310nm, 1550nm, CWDM, and ITU-Grid DWDM

wavelengths with transparent wavelength conversion.

Note:

Recently introduced Cyan single-fiber XFP and SFP+ transceiver modules are designed

specifically for datacomm applications. These transceiver modules do not support OTU2 signal

types.

•

SFT-10G16 ports are grouped in pairs (1-2, 3-4, 5-6, and so forth) for signal regeneration.

Содержание L-AMP



















































































































































































































Результаты поиска

Содержание L-AMP

Отзывы:

Бренды по названию

Популярные бренды

Cyan L-AMP, Инженерное и планировочное руководство

Результаты поиска

Содержание L-AMP

Отзывы:

Бренды по названию

Популярные бренды