background image

 

Operating instructions VacuStar L400  

 

Safety 

 

 

 

 

 

 

Safety 

  

2.1  Intended use 

   

The compressor vacuum pump VacuStar L400 is intended 
exclusively for the compression or suctioning of filtered air. 

   

Only use VacuStar L400 for the intended use.  

All specifications in the operating instructions must be strictly 
adhered to (technical data, operating data, permissible working 
range), refer to Page 15, chapter 3 in this regard. 

 

All types of claims due to damage arising from improper use are 
excluded. The operator alone shall be responsible for any damage 
arising from improper use. 

 

2.2  Acceptance and monitoring 

The VacuStar L400 is not subject to any acceptance and 
monitoring obligation. 

 

2.3  Operator's responsibility  

The VacuStar L400 is used for industrial purposes.  
The operator of the VacuStar L400 is therefore subject to the legal 
obligations concerning occupational safety. 

The provisions valid at the place of installation as well as the safety 
and accident prevention regulations of the Institution for statutory 
accident insurance and prevention must be observed. The operator 
must in particular: 

 

inform himself on the valid industrial safety regulations. 

 

determine the additional hazards that arise from the special 
working conditions at the VacuStar L400's place of installation 
by means of a hazard assessment. 

 

implement the necessary rules of conduct for operation of the 
VacuStar L400 at the place of installation by means of user 
instructions. 

 

check at regular intervals during the VacuStar L400's entire 
period of use whether the user instructions correspond to the 
current state of the body of rules and regulations. 

 

adapt the operation instructions, if necessary  to the new 
regulations, standards, and operating conditions . 

 

clearly regulate the responsibilities for installing, operating, 
maintaining and cleaning the VacuStar L400. 

 

ensure that all employees working on or with the VacuStar L400 
have read and understood the operating instructions. In addition 
he must at regular intervals train the employees in how to deal 
with the VacuStar L400 and inform them about potential 
hazards. 

Содержание VacuStar L400


































Отзывы: