CVS VacuStar L400, Руководство по эксплуатации

Страница: 27 / 33

Operating instructions VacuStar L400
Malfunctions
27
8
Malfunctions
This chapter describes possible causes of malfunctions and
troubleshooting tasks.
Reduce the maintenance intervals if similar malfunctions occur
repeatedly due to above-average intensive use so intervals
correspond to the actual load.
Contact the manufacturer in case of malfunctions that cannot be
repaired with the aid of the following information (

p. 2)!
8.1 Safety
See chapter 2.6 "Occupational safety and special risks".
Personnel

The trouble shooting work described at this point can be carried
out by the operator, unless otherwise indicated.

Some work may only be carried out by specially trained
specialised staff or exclusively by the manufacturer himself.
This is specifically pointed out in the description of the individual
malfunctions.

Only electrical specialists may carry out work on the electrical
system.

Components and parts may only be replaced by specialised
staff.
Personal protective equipment See chapter 2.5.
Environmental protection See chapter 7.1.
Conduct in the case of
malfunctions The following basically applies:
1. Immediately trigger an EMERGENCY-STOP in case of
malfunctions constituting an immediate danger for individuals
or material assets.
2. Switch of all power supplies and secure against restarting.
3. Inform person in charge at the place of installation.
4. Depending on the type of malfunction, have the cause
determined and eliminated by responsible and authorised
specialised personnel.
8.2 Recommissioning after corrective action
After corrective action or trouble shooting:
1. Reset emergency stops.
2. Acknowledge error message or malfunction at the control
system.
3. Ensure that nobody is staying in the hazard area.
4. Start in accordance with the instructions
in chapter „start-up“.