CVS VacuStar L400, Руководство по эксплуатации

Страница: 26 / 33

Operating instructions VacuStar L400
Maintenance
26
Action after sucking over of foreign
matter If foreign matter has been sucked over into the VacuStar L400,
proceed as follows:

Allow VacuStar L400 to cool down.

Unscrew the locking screw in the inlet (fig. 1, pos. 16)

Open vehicle box to allow the VacuStar L400 to be run without
vacuum or pressure build-up.

Switch on VacuStar
L400 and allow approx. 0.5…1 l of a diesel-
oil-mixture (1:1 mixing ratio) to be sucked into the
VacuStar L400 through the hole in the inlet at approx. 1000 min
-
1 .

Afterwards, allow another 0.2 - 0.5 l clean oil to be sucked in via
the inlet.

Completely remove this diesel-oil-mixture from the VacuStar
L400 and do not allow to collect in the downstream silencer -
fire hazard!

Switch off VacuStar L400 and re-attach locking screw. Perform
a lubricating oil inspection pursuant to chapter 6.4 before the
VacuStar L400 is restarted.