CVS VacuStar L400, Руководство по эксплуатации

Страница: 25 / 33

Operating instructions VacuStar L400
Maintenance
25
7.3 Performance of maintenance work
Cleaning the VacuStar L400 Carrying out cleaning work:
1. Switch off system and secure against restarting.
2. Remove soiling appropriately. Observe the following:

Do not use aggressive cleaning agents.

Pay attention during cleaning that no water gets into the
compression chamber.

Exercise special caution when cleaning with high-pressure
cleaning systems.

Absorb oil deposits with oil-absorbing materials (e.g. sawdust).

After cleaning work, check that all previously opened covers
and safety equipment are correctly installed and function
correctly.

After wet cleaning, warm up the VacuStar W for a few minutes.
Cooling of the VacuStar L400 To warrant best cooling, the protective grid apertures must be free
of deposits.
Suction air filter The contamination state is usually indicated by a maintenance
display. If maintenance is required, open filter casing and replace
filter cartridge.
Action after lengthy standstill If the standstill of the VacuStar L400 installed inside the vehicle
lasts for more than a month, we recommend putting the
VacuStar L400 into operation once a month for 15 minutes.