CVS RKL 160, Руководство по эксплуатации

Страница: 24 / 32

Operating instructions Multi-cell compressor RKL 160
Maintenance
24
7.3 Performance of maintenance work
Cleaning of the RKL 160 Observe the following when cleaning the RKL 160:
1. Switch off RKL 160 and secure against restarting.
2. Remove soiling appropriately. Observe the following:

Do not use aggressive cleaning agents.

Pay attention during cleaning that no water gets into the
compression chamber.

Exercise special caution when cleaning with high-pressure
cleaning systems.

After cleaning work, check that all previously opened covers
and safety equipment are correctly installed and function
correctly.

After wet cleaning, warm up the RKL 160 for a few minutes.
Cooling of the RKL 160 To warrant best cooling, the protective grid apertures must be free
of deposits.
Suction air filter The contamination state is usually indicated by a maintenance
display. If maintenance is required, open filter casing and replace
filter cartridge.
Action after lengthy standstill If the standstill of the RKL 160 installed inside the vehicle lasts for
more than a month, we recommend putting the RKL 160 into
operation once a month for 15 minutes.