CVS RKL 160, Руководство по эксплуатации

Страница: 21 / 32

Operating instructions Multi-cell compressor RKL 160
Start-up and operation
21
6 Start-up and operation
6.1 Safety notes
See chapter 2.6 "Occupational safety and special risks".
6.2 Start-up
Inspection prior to initial start-up The following points must be checked prior to initial start-up:

Transport damage at the RKL 160

Conduits for free passage and leak tightness.

Screw connections for tightness.

Drive's sense of rotation by briefly switching it on and off
(observe rotation direction arrow).

Direction of installation and function of non-return valve.

Safety valve function.

Accidental contact protection function.
Start-up

Open present shut-off devices

Switch on drive (engage gently)

Adjust input speed

Check the operating data.
Inspections during operation During operation the operator has to check the following data
every 10 minutes :

Input speed (see Tab. 2)

Final overpressure (see Tab. 2).
6.3 Switching off
Switch off the RKL 160 as follows:

Switch off drive.

Close the shut-off valves (if installed)

Drain the condensate tank (if available) Tank may not be under
pressure then.
6.4 Inspections to be performed
Non-return valve inspection
The non-return valve is maintenance free, but is subject to wear
like any other moving part. We recommend a visual inspection
every 3 months. In this connection, the non-return valve must be
dismantled, cleaned, freed of deposits and checked for freedom of
motion.