Function Menu
Spectra II
40
Operating Manual
08.17
Label dimension only:
The parameters for label length, gap length
and label width can be transferred by the interface of the printer. All
other parameter settings were ignored at the interfaces and are to be
made directly at the printer.
On:
Parameters such as print speed and contrast can be transferred
to the printer with our Labelstar Office. Parameters which are set
directly at the printer before are no longer considered.
Off:
Only settings made directly at the printer were considered.
On:
The query question referring the customized variable appears
once before the print start at the display.
Auto:
The query referring the customized variable appears again at
print end. Additionally a query appears demanding the number of
copies that should be print.
Auto no quant:
The question referring the customized variable
appears again after print end. However, the same number of copies is
printed. This number was defined once at the start of the print order.
Off:
No query of the customized variable appears at the display. In
this case the stored default value is printed.
On:
A layout loaded once from CF card, can be reloaded after a
restart of the printer automatically.
Procedure:
The used label is saved onto CF card. The label is loaded
from CF card and printed. After switching the printer Off and again On,
the label is loaded from CF card automatically and can be printed
again.
NOTICE!
The last loaded label from CF card is always again loaded after
a restart of printer.
Off:
After a restart of printer the last used label must be again loaded
manually from CF card.
NOTICE!
A common use of the functions Autoload and Hotstart is not
possible. For a correct Autoload procedure the Hotstart must
be deactivated in the printer.
On:
A discontinued print order can be continued after switching on the
printer anew.
Off:
After switching off the printer the complete data is lost (see
chapter 11.2, page 108).
External parameters
Customized entry
Autoload
Hotstart