C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-TP.Bắc Ninh
77
Adjust and Function Specification
§
CE45 Setting Times of 1st frequency decrease (setting range 0~200min)
(1st Bob down speed % time)
Set the time of 1st frequency decrease percentage.
When multi-steps operation time shorter than CE45, CE42 will be the current frequency
decrease order.
If CE45=0 it will use CE42 as frequency decrease order, no matter what is the time of
the perform time in multi-step function.
§
CE46 Setting Times of 2nd frequency decrease (setting range 0~200min)
(2nd Bob down speed % time)
Set the time of 2nd frequency decrease percentage.
When multi-steps operation time longer than CE45 and shorter than CE46, the
frequency will decrease as CE43.
If CE46=0 it will use CE43 as frequency decrease order, no matter what is the perform
time in multi-step function. When multi- steps operation time longer or equal to CE46, it
will use CE44 as current frequency decrease order.
§
CE47 Multi steps function modes selection
（
settable range0
〜
1
）
The function cannot be modified during revolution
Select operation modes on speed variation when process control switch from previous
step to next step.
CE47=0 Liner operation
CE47=1 Gradually operation. (Perform time can set to zero, when perform time set to 0,
perform time will according to CD08, CD09 increase or decrease. If the step
frequency set to 0, the step will be ended.)
CE47=2 Liner operation use Up/Down Speed % function.
CE47=3 Gradually operation use Up/Down Speed % function. (Perform time can set to
zero, when perform time set to 0, acceleration/deceleration time will according
to CD08, CD09. If the steps’ frequency set to 0, the step will be ended.)
Liner operation
O u tp u t fre q u e n c y
C E 1 6
C E 1 5
C E 1 4
C E 1 3
C E 1 2
C E 1 1
C E 0 8
C E 0 9
