Custom Works 0711, Инструкция по эксплуатации

Страница: 3 / 13

Front Suspension Front Suspension
Front Suspension Front Suspension
Front Suspension
4240
3332
5230
2335
3253
- Insert 4240 Inner Pin thru 3332 Susp Brace, then thru
first leg of 3253 Susp Arm and into 2335 Front Susp
Mount.
- Snap 5230 E-Clips to 4240 Susp Pin.
- Arms should pivot freely on the mounts.
3318 Qty 1
Front Shock Tower 3310 Qty 1
Rocket Chassis
5253 Qty 4
4-40 x 3/8 BH Screw
1:1
3253 Qty 2
Front Susp Arms L&R
-Parts for
Step#1
4240 Qty 2
Front Inner Susp Pin 2335 Qty 2
35 deg F Susp Mnt
1:1
3332 Qty 1
1.4” Front Susp Brace
-Parts for
Step#2
1:1
5230 Qty 24
E-Clip
1:1
5263 Qty 4
4-40 x 3/8 FH Screw
- Fasten the 3318 tower to the suspension assembly.
- Fasten the suspension assembly to the 3310 Chassis.
1:1
STEP #1 STEP #2
3318
5253
5263
3310
- Suspension mounts
locate in outer
option on chassis &
shock tower.
-Parts for
Step#3
8122 Qty 5
Ball Stud 3647 Qty 2
Steering Pivot 3646 Qty 2
Steering Post 1233 Qty 4
Flanged Bearing 7207 Qty 2
Spacer
5263 Qty 2
4-40 x 3/8 FH Screw
Steering Components Steering Components Steering Components Steering Components Steering Components
1:1 1:1
7047 Qty 6
Spacer
8130 Qty2
Small Ball Cup
3234 Qty2
Spacer
5281 Qty1
4-40 Stud
-Parts for
Step#2
7200 Qty 2
Front Axle 7209 Qty 4
Spacer
1:1
3202 Qty 2
Steering Block L&R 7209 Qty 2
Ball Stud King Pin
1:1
1:1
1255 Qty 6
Spacer
5230 Qty 24
E-Clip
1:1
4244 Qty 2
Front Outer Susp Pin 1:1 5292 Qty 4
M2.5 x 4 BH Screw
1:1
5004 Qty 2
6-20 Set Screw
1:1
5252 Qty 6
4-40 x 1/4 BH Screw
1295 Qty 2
Steer Arm Extender
-Parts for
Step#1
5235 Qty 12
Ball Cup
5226 Qty 6
2.375” Ti Turnbuckle
1:1
- Thread the 5235 Ball Cups onto the ends of the 5226 Turnbuckle.
- NOTE: Turnbuckle has RIGHT and LEFT threads!
1:1
Assembled Camber Link and Steering Linkage.
-Attach to car in Step #3 of this bag.
- Make 6 Linkages.
5235 5226 5235
STEP #1
5217 Qty 2
4-40 Lock Nut
3400 Qty 2 (Left Shown)
0 Deg Castor Block