THE BALLER
CONTENTS:
INSTRUCTION MANUAL
8+
FNT0381
Made in China
Used with permission. Manufactured and Distributed by:
Jazwares, LLC, Sunrise, FL 33326, USA
Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom
Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt, Germany
www.jazwares.com / www.jazwares.de
© 2020 Epic Games, Inc. Fortnite and its logo are registered trademarks of
Epic Games, Inc. in the USA (Reg. U.S. Pat. & Tm. Off.) and elsewhere.
All rights reserved.
FCC ID: YNIJAZWARES381 FCC ID: YNIJAZWARES117
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
WARNING!
Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to
operate the equipment.”
NOTE:
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:“
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Conforms to toy safety standards CPSIA, ASTM-F963 and EN71.
HOW TO CLEAN YOUR
BALLER DELUXE VEHICLE
• To clean, wipe with a dry cloth.
• Do not submerge in water.
• Do not use chemical or abrasive cleaners.
BATTERY WARNINGS:
1. Batteries are to be replaced by an adult.
2. Non-rechargeable batteries are not to be recharged.
3. Rechargeable batteries are to be removed from the toy before being charged.
4. Rechargeable batteries are only to be charged under adult supervision.
5. For best performance, only the recommended batteries or their equivalent are to
be used.
6. Batteries must be inserted with correct polarity.
7. Do not mix new and used batteries.
8. Do not mix different types of batteries.
9. Exhausted batteries are to be removed from the toy.
10. The supply terminals are not to be short-circuited.
HYBRID
(STAGE 2)
THE BALLER
REMOTE
CONTROL
