D105-T420 SERIES
Service Hose Crimpers
9
Note:
Follow the lubrication procedure prior to crimping procedure
.
CAUTION:
Failure to lubricate the die set and T420 pressure plate
could result in the die seizing in the cone base.
Step 1:
Make certain that the
Cone Base
is clean and lubricated prior
to inserting the die set.
Step 2:
Select the
Correct Die Set
for the combination of hose and
fi tting being crimped.
Note:
Consult your hose and fi tting manufacturer for the correct die size
for the combination of hose and fi tting being crimped.
Note:
The number etched on the OD of the die ring represents the fully
closed diameter of the die set in millimeters. In addition, rubber caged
die sets are color-coded for easier identifi cation.
Step 3:
Lubricate the contact surfaces
, both the top and the outside
edges of the die fi ngers, with CrimpX oil (supplied with the crimper), or
a molybdenum disulfi de high pressure grease.
Failure to lubricate the contact surfaces with the correct lubricant
will cause the dies to seize in the cone base, causing damage
to the die set as well as possibly damaging the crimper.
CRIMPING WITH
STANDARD
T420 PRESSURE PLATE
