MHW 0008 – DK 1695 | Version 002 – 21/08/2019 | custo med GmbH
2
Holter
Hardware, description of device for custo watch
[2] Holter hardware, custo watch |
page 8
2.5
Device operation custo watch and custo guard
2.5.1
Display and control elements on the devices
The custo watch has a display . The display is activated by pressing the grey
button . The contents displayed by the custo watch differ depending on its state
– standby or recording. A description how to operate the custo watch is provided in
chapter
2.5.4 Operating the custo watch display.
The custo guard 3 ECG transmitter has a LED display which indicates the opera-
tional readiness of the system when both devices are in the custo docking station
and connected to the PC or power supply unit.
2.5.2
Changing the custo watch strap set
To change the strap set, hold the custo watch so that the rear side of the hous-
ing can be seen (with the type plate and four charging contacts). Press the strap
lock
(plastic clip in the centre of the strap attachment) away from the custo
watch housing while sliding the strap backwards, away from the housing. Repeat
the process for the remaining strap.
To attach the other strap set, hold the custo watch so that the top of the housing can
be seen. Place the strap from above on the corresponding parts on the housing
and press the strap down until it clicks into place. Repeat the process for the
remaining strap.
