MHW 0008 – DK 1695 | Version 002 – 21/08/2019 | custo med GmbH
2
Holter
Hardware, description of device for custo watch
[2] Holter hardware, custo watch |
page 16
2.6.4
Attaching custo guard 3 with ECG cable custo guard 3
If it is not possible to use an electrode belt, the ECG transmitter can be worn with
the ECG cable custo guard 3:
Press the custo guard 3 ECG transmitter firmly onto the four contact points
of the ECG cable custo guard 3 .
Attach the electrodes (e.g. custo sensive) to the cable ends.
Attach the neck strap to the hooks of the ECG cable custo guard 3.
Put the ECG transmitter around the patients neck
and adjust the neck strap to the desired length.
Clean the electrode application points,
the skin must be free from grease and personal care products.
Remove the protective films from the electrodes.
Affix the electrodes to the chest, see Figure and .
To prepare the electrode application points we recommend the use of custo prep
ECG preparation cream. Rub the skin areas lightly with custo prep.
We also recommend the use of custo sensive ECG electrodes (latex-free, PVC-free,
skin-friendly, permeable to air and moisture).
L
3
R
