User Guide
DDOC0099-000-AH
DTS1 CSfC
4 - 1
Installation
© 2020 Curtiss-Wright Defense Solutions
Revision 2.0
Installation
4.1
Package
NOTE
Either L-brackets or a Dzus mount is included depending on the ordered configuration.
The DTS1 package contents are listed below:
•
DTS1 Chassis
•
L-Brackets*
•
Dzus Mount*
•
Product Documentation CD
section for part numbers).
•
RMC Module(s)
•
Power Lab Cable
•
Utility Lab Cable
•
Ethernet Lab Cable
4.2
Inspection
The DTS1 is a two-part data storage system that consists of a DTS1 chassis and a RMC module.
Additional accessories may be included (if ordered). All received items should be inspected for
damage. Inspect all units as follows:
•
All screws should be tight.
•
The door gasket should be free from any cuts, crushing, or flattening damage
•
All anti-tamper labels (Figure 4.1 and Figure 4.2) should be unbroken.
•
All components should be free from any dents, cracks, or damage.
•
All connectors pins should be present, straight, and undamaged.
If the DTS1 chassis or any accessories were damaged in shipping or the enclosure was breached,
immediately notify Curtiss-Wright Defense Solutions or your supplier.
Figure 4.1
DTS1 Chassis Anti-Tamper Label Locations
Anti-Tamper Label Locations
DDOC0099-0013