Mar 2017
Page 55
© Penny & Giles Aerospace Ltd. No part of this work may be reproduced or distributed by any
means without prior permission in writing from the copyright owner.
DATA ACQUISITION FLIGHT RECORDER Type D51615-202-XXX or D51615-
202-XXX-090- with CCU Type D51616-XXXX and CAM Type D51623-XXXX
Installation and Operating Manual with Illustrated Parts
List
Commercial in Confidence
PIM434-I
(5)
28 V DC 4A regulated power supply
6.6.2 Procedure Using Internet Explorer
NOTE
:
The following procedure assumes that the PC has been
configured to support communications between the
DAFR and PC as detailed in the Ground Support
Interface manual PIM 428-O.
FDR Data Download
(1) Ensure that Internet Explorer, PGS and the FDR Convert
Utility have been installed on to the download PC.
(2) Connect the PC to the DAFR replay panel MTI connector
using either Cable Type SA109654 or SA109680
depending on whether the DAFR is on the bench or
aircraft.
(3) Apply power to the DAFR and the PC.
NOTE:
DAFR may take a minute or two after power is applied
before responding to commands via the MTI
(4) Download is started by either selecting the Internet
Explorer icon on the desktop or by selecting the
Internet Explorer task bar from the Task menu.
(5) Enter the recorder IP address of 10.0.0.100 in the
address box, and click ‘go’.
(6) Internet Explorer attempts to connect to the recorder. If
successful, the Recorder ‘
Home
’ page is displayed.
(7) With communications established, Internet Explorer
displays the home page on which the navigation menu
on the left of the screen.
(8) Select
the
File Download
option and from the ‘
File
Download
’ page select the ‘
Flight Data Master’
option. Download the entire FDR memory content as the
length of recording since the previous download cannot
be guaranteed. Save the file to an appropriate directory
on the host PC.
(9) On completion of the download, click the
OK
button in
the download complete message box, return to the
Home page by selecting ‘
Home
’ on the Navigation
menu. Select ‘
File, Close
’ or click on the window close
box to the top right of the window.