CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
51160-INS-RB
•
PAGE 2
This package includes:
(1) Brake controller module with quick plug
(1) Mounting bracket
(2) Keyed spacer
One or more of the following may be needed to complete installation:
• Brake controller connection harness, supplied with the tow vehicle (if equipped)
• CURT quick plug adapter harness - custom connector for specific vehicles.
See website for availability
• CURT part# 51515 / 51516 - male quick plug with pigtails
• CURT part# 51500 - brake controller wiring kit
Important Information
Read and follow installation and setup instructions carefully. Failure to do so could
result in damage to the brake controller, no trailer brakes or poor brake performance.
Disconnect the electrical plug between the trailer and tow vehicle before testing a
breakaway switch. Failure to disconnect may damage the brake controller.
Avoid mounting the brake controller module near a CB radio or other RF transmitter.
WARNING
The brake controller must be mounted firmly in place.
Failure to do so could lead to improper operation and / or brake failure.
WARNING
The brake controller's positive (with 30-amp circuit breaker) and ground
wires must be connected directly to the tow vehicle's battery using 10-gauge minimum
stranded wire. Connecting to existing wiring or an alternate ground may damage vehicle
circuits, lead to failure of the brake controller module, loss of trailer brakes or vehicle fire.
NOTICE
Removal of the factory-supplied quick plug can void warranty.
(4) Mounting bracket screws
(1) Quick reference card
(2) Keyed washer
