CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
51160-INS-RB
•
PAGE 16
The Assure
™
will display that it
'
s checking calibration, that it
'
s calibrating, or that
it needs re-calibration by displaying
'Reconnect'
. If the
'Reconnect'
indication
appears, disconnect and reconnect the bulb from the blue wire to recalibrate. It will
show
'Disconnect'
when disconnected followed by
'Calibration'
, followed by the
'Connected'
icon when complete.
Manual Control Testing
Using the (+) button, adjust the output to the maximum setting. Slowly
activate the manual control button to its full output. Press both (+) / (-) buttons to
access the load setting screen, using the (+) button to adjust to the maximum setting.
Accelerometer Testing
While keeping the brake controller level, connect the red brake
input wire of the Assure
™
to the positive terminal of the 12V battery.
The brake controller output will activate and the bulb may be dimly lit.
Slowly tilt the front of the Assure
™
to about 45° and the brightness of the bulb will
increase corresponding with the output shown by the brake controller. Slowly tilt
the front of the Assure
™
back to level and the brightness of the bulb will decrease
corresponding with the output shown by the brake controller.
When finished testing, disconnect the wiring from the positive terminal
of the 12V battery ensuring the exposed contacts do not make contact.
If the Assure
™
does not function as described during the above test steps
return the brake controller for service or replacement.
