Currie Technologies
Technical and Customer Service
1-800-377-4532
12
Ac
26.
Flip the seat forward
using the release lever below it. This allows
access to the battery compartment.
27.
While pulling the locking pin outward (
Ac-1
),
slide the battery into
the frame
(
Ac-2
). Once the battery is seated, release the pin to lock the
pack in place, then
connect the battery plug
(
Ac-3
).
28.
Adjust your front and rear brakes.
Your brakes may not be
fully adjusted from the factory; refer to your owner’s manual for detailed
instructions on brake adjustment or consult a professional bike mechanic if
you are not comfortable making these adjustments yourself.
Do not attempt
to ride your bicycle without properly adjusting the brakes!
Ab
Release
locking pin (1)
Slide battery
into frame (2)
Plug in battery (3)
