Currie Technologies
Technical and Customer Service
1-800-377-4532
3
Please recycle
packaging materials!
A
B
Unpacking and Preparation
Seatpost
1.
Carefully remove the rear end sub-assembly and the main
frame sub-assembly from their boxes
; you should have a friend help
you with this, as these parts are heavy. Find the parts box packaged with the
main frame sub-assembly and set it aside for now.
2.
Remove the battery from the main frame sub-assembly
(see the
Battery section on page
14
for more information)
.
Begin charging the battery
—this will take about 10 hours. The battery
is inside the main frame sub-assembly. The charger is in a small white box,
packaged with the main frame sub-assembly. A solid red or blinking green
light on the charger (depending on model) indicates the battery is charging
properly. A solid green light indicates that the charger has entered trickle
charge mode, and your battery is at least 80% full. For maximum range,
please charge for the full recommended time period (8-10 hours).
3.
Apply grease to the inside of the seat tube
, then
insert the
seatpost
and
close the quick release tightly
(Photo
B
). It will help
during the next steps if you lower the saddle all the way down; it can be
adjusted to a comfortable height before your first ride.
Refer to the appendix to this guide for more information on the use and
adjustment of quick release levers.
It is vital to your safety that you
understand and properly secure this lever!
Battery plugged in to charger
