Currie Technologies
Technical and Customer Service
1-800-377-4532
7
M
N
13.
Close the transfer chain
by reattaching the master link, then
reversing step
11
to snap on the face plate.
14.
Make sure the front and rear frame sections are perpendicular
to each other
.
Adjust the tension of the transfer chain
by sliding the
rear end towards or away from the main frame; when properly adjusted the
chain should have about 1/4in of vertical play.
Tighten the four carriage
bolts from step 7
, then re-check the rear-end alignment and transfer chain
tension.
Rear axle
Main F
rame
15.
Locate the front wheel –It can be differentiated from the rear wheels
because it is the only one with hardware already attached to its axle.
Remove the black plastic dropout protector from the tricycle’s
fork and the two disc-shaped axle protectors from the front wheel
,
then
loosen the hardware attached to the front wheel
and
insert
the wheel into the fork
as shown in Photo
N
.
Tighten the axle nuts
securely
with a 15mm wrench.
Front Wheel
Transfer chain
