Currie Technologies
Technical and Customer Service
1-800-377-4532
5
F
H
6.
Turn the tricycle upside down, so its weight rests on the seat and
handlebars. Be careful not to damage the seat or the handlebar-mounted
brakes and throttle.
Make sure the battery is not installed in the frame!
7.
Fully loosen, but do not remove, the four carriage bolts
shown in
Photo
F
using a 17mm wrench.
8.
To assist in the next step,
make sure the heads of the bolts
attached to the rear end sub-assembly are pushed flush with the
frame
(Diagram
G-1
). The bolts attached to the frame itself should be
pushed in the opposite direction (Diagram
G-2
).
9.
Slide the rear-end assembly into the main frame
(Photo
H
),
making sure the washers attached to the four carriage bolts sit to the outside
of the frame, against the nuts.
Make sure the rear axle is perpendicular
to the frame
, but do not tighten the bolts yet.
G
Top view (Tricycle upside down)
Rear
Bolt head flush (1)
Nut flush (2)
Front
Rear end
