CUMMINS ALLISON JetScan iFX i100 Скачать руководство пользователя

Страница: 53 / 122

How to Use Stranger Mode

Counterfeit detection is available in STRANGER

mode.

To set strap limits, see

Strap Counts and Strap Limits

Select i100-series models process checks, deposit slips and other financial institution

MICR documents that meet U.S. standard specifications.

This section provides instructions for using the

STRANGER

mode. Notes, checks and tickets can be

processed in

STRANGER

mode, as described below:

•

Note processing:

Scans for the first denomination processed, which is the target, and stops when

another denomination is found. When the machine encounters a different denomination, it is

called a stranger. A grand total is provided.

•

Check processing:

The machine assumes checks are in the hopper. When the machine

encounters a note, it is presented as a no call with a prompt to enter a MICR number. Remove

the note from the pocket and press

CONT

. Check order integrity settings determine feed error

behavior.

(See

Check Setup Menu 2

for more information.)

A grand total piece count is provided.

•

Ticket processing:

Scans for a bar code and rejects documents without a bar code as strangers.

Use this mode for batching (strapping) tickets. A grand total piece count is provided.

Press

MODE

on the main screen. The

MODE-SELECTION

screen appears.

Press

STRANGER

Press

EXIT

to return to the main screen.

When processing notes, press

on the main screen to enable counterfeit detection if desired.

Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose clothing.

Содержание JetScan iFX i100



























































































































Результаты поиска

Содержание JetScan iFX i100

Отзывы:

Похожие инструкции для JetScan iFX i100

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetScan iFX i100, Руководство по эксплуатации

Результаты поиска

Содержание JetScan iFX i100

Отзывы:

Похожие инструкции для JetScan iFX i100

Бренды по названию

Популярные бренды