CUMMINS ALLISON JetScan iFX i100 Скачать руководство пользователя

Страница: 117 / 122

115

Term

Definition

Clear

Used to reset accumulated totals for batches, sub-batches, day totals and straps

to zero. It is done by pressing CLEAR and then pressing the key corresponding to

the total to be cleared.

Counterfeit (CF)

Detection

Users can set different infrared (IR), ultraviolet (UV), fluorescence (FL), and

magnetic sensitivity levels by denomination for the detection of suspect

documents. The lower the sensitivity, the greater the opportunity to pass a

counterfeit note. The higher the sensitivity, the greater the opportunity to stop on

a good, non-counterfeit note.

Count Mode

Follow hyperlink at left.

Day Total

A day total is the grand total of deposits processed since the last time day totals

were cleared. Day total tracks individual amounts and provides a total by

category, as well as a grand total. Available in all operating modes.

Defaults:

Factory and User

The machine has two types of default settings: factory and user.

•

Factory defaults are coded permanently into the machine and are active

when the device is shipped.

•

User defaults, such as setup parameters, are configured during machine

setup and remain unchanged until reset. User defaults can be defined,

saved and retrieved by operators.

Doubles

A condition that occurs when two stacked documents simultaneously pass

through the reading mechanism. The machine stops when this condition occurs.

Facing Documents

When FACE is selected in addition to STRANGER, MIXED or SORT mode, the

machine stops when it detects a non-faced document. The first document

processed determines the facing.

Hopper

The area on top of the machine where documents are placed for processing.

Sensing

Technology

Advanced models feature this technology, which uses analytic software and

cutting-edge sensors to catch counterfeit notes. The technology can be upgraded

to enhance its ability to detect counterfeits as counterfeits evolve.

Labels

Press SET at MEDIA ENTRY in

SETUP MAIN MENU 2

to prompt the

MEDIA ENTRY

SETUP

screen. Here, users create custom-titled label fields, such as account

number or store number. Via an automatically generated prompt or by pressing

MEDIA on the main screen, users enter data into the custom-titled label fields,

which then appear on printed reports.

Mixed Mode

Follow hyperlink at left.

No Call

The machine cannot identify a document or a denomination.

Orienting Documents

When ORIENTATION is selected in addition to STRANGER, MIXED or SORT mode,

the machine stops when it detects a non-oriented document. The first document

processed determines the orientation.

Содержание JetScan iFX i100



























































































































Результаты поиска

Содержание JetScan iFX i100

Отзывы:

Похожие инструкции для JetScan iFX i100

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetScan iFX i100, Руководство по эксплуатации

Результаты поиска

Содержание JetScan iFX i100

Отзывы:

Похожие инструкции для JetScan iFX i100

Бренды по названию

Популярные бренды