Cumberland PNEG-942, Инструкция по установке и эксплуатации

Страница: 12 / 42

1. Safety
12 PNEG-942 Belt Drive Galvanized Fans
READ THESE INSTRUCTIONS BEFORE INSTALLATION, OPERATION AND SERVICE
SAVE FOR FUTURE REFERENCE
1. Read and understand the operating manual before trying to install or operate the Galvanized Fans.
2. Power supply should be OFF and LOCKED OUT for service of electrical components. Use CAUTION
in checking voltage or other procedures requiring power to be ON.
3. Never attempt to operate the Galvanized Fans by jumping or otherwise bypassing any safety devices
on the unit.
4. Keep the Galvanized Fans clean. Do not allow debris to collect around motors, belts, pulleys
or bearings.
5. Use CAUTION in working around the Galvanized Fans moving parts.
This product is intended for the use in ventilation of livestock buildings only. Any other use is considered
a misuse of the product.
Some edges of the product’s components are sharp. Examine each product component to determine if
there are any safety considerations to be taken prior to use and/or installation. Any and all necessary
personal protective equipment should be worn at all times when handling, assembling, installing and
operation of the product and/or its components.
Throughout this manual, guards are removed for illustration purposes only. All guards must be in place
before and during operation.
NOTE:
After using a Poultry Litter Treatment (PLT) near galvanized equipment, make sure there is no
(PLT) residue on any galvanized surfaces, as it will lead to premature rusting. To clean galvanized
surfaces, use a water based emulsifier, alkaline based cleaners with a pH of 12 or lower or organic
solvents. Then rinse the area with fresh water and wipe clean with a soft cloth.